RAMMER 1533E, Operator'S Manual

Page: 22 / 74

COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY Page 22 - Operation
Safety 1533E STD
PRESSURE ACCUMULATORS
The safety label on or near the accumulator is shown below.
"HIGH PRESSURE HAZARD
Improper handling of pressurized accumulator will cause death or severe injury.
Read workshop manual before disassembly.
Release pressure before disassembly.
Recharge with nitrogen (N
2
) only."
The hammer incorporates one or two pressure accumulators, depending on the
model. The accumulators are pressurized even when there is no hydraulic pressure
to the hammer. Attempting to dismantle the accumulators without first releasing the
pressure can cause injury or death. Do not try to dismantle pressure accumulators,
contact your local dealer first.
LIFTING EQUIPMENT
You can be injured if you use faulty lifting equipment. Make sure that lifting
equipment is in good condition. Make sure that the lifting equipment complies with
all local regulations and is suitable for the job. Make sure that the lifting equipment
is strong enough for the job and that you know how to use it.
Do not use this product or any of its parts for lifting. See “Lifting instructions” on
page 9. Contact your carrier dealer to find out how to lift with your carrier.
SPARE PARTS
Use only genuine spare parts. Use only genuine tools with hydraulic hammers. The
use of other spare part or hammer tool brands may damage the product and void the
warranty.
R010 3 52
DANGER
HIGH PRESSURE HAZARD
Improper handling of pressurized
accumulator will cause death or
severe injury.
Read workshop manual before
disassembly.
Release pressure before
disassembly.
Recharge with nitrogen (N
2
) only.
169410_ENG-5