RAMMER 1533E Operator'S Manual Download | Manualshive

Page: 14 / 74

background image

COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY

Page 14 - Operation

Product introduction

1533E STD

3.6 RD3 REMOTE MONITORING DEVICE

RD3 is a hammer-mounted device that enables remote monitoring of hammer units.
During hammer operation, RD3 collects and transmits operating and location
information. This information is available through an online service and can be
used, for example, to view hammer work history, manage service schedules,
optimize hammer performance, plan operator training and conduct fleet
management.

For more information, contact your local Rammer dealer.

Note: See “RD3 and data privacy” on page 72.

Warning! RD3 contains a SIM card to enable remote connections and an
encased lithium metal battery. Both items are regulated for air transport.
Consult your forwarder about any restrictions for air freight.

Warning! Lithium is a highly flammable substance. Store damaged lithium
batteries in a fire proof container. Never transport a damaged or unprotected
lithium battery. Follow local laws and regulations on proper disposal of
damaged lithium batteries.

Warning! Inhalation, skin contact and eye contact can occur when the battery
is opened. Upon exposure to internal contents, the corrosive fumes will be very
irritating to the skin, eyes and mucous membranes. Overexposure can cause
symptoms of non-fibrotic lung injury and membrane irritation.

R010541

RD

3

«
...
12
13
14
15
16
...
»

Summary of Contents for 1533E











































































Reviews:

No comments

Related manuals for 1533E

Brand: BARTON TOOLS Pages: 8

Brand: Parkside Pages: 138

Brand: Magswitch Pages: 2

Brand: TREND Pages: 14

Brand: LEVIOR Pages: 2

Brand: Rehau Pages: 36

Brand: Neilsen Pages: 16

Brand: unicraft Pages: 20

PolySprint NPS-1210A-1

Brand: Nitta Pages: 22

Brand: unicraft Pages: 20

Brand: Lux Tools Pages: 16

Brand: Wacker Neuson Pages: 30

Brand: CDI Pages: 2

Brand: Draco Pages: 4

Brand: Sealey Pages: 4

Brand: Sealey Pages: 4

Brand: Neilsen Pages: 4

Brand: Neilsen Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands