RAMMER 1533E, Operator'S Manual

Page: 43 / 74

Lubrication - Page 43 COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY
Hammer tool greasing 1533E STD
1.2 RAMLUBE II
Dispose of empty grease containers appropriately.
The hammer can be equipped with an automatic greasing device Ramlube II. See
“Ramlube II” on page 13.
Do not remove the grease cartridge unnecessarily. Always keep the grease cartridge
in the greasing device to prevent dirt from entering the greasing device.
Note: Some hammer models are equipped with an adapter kit for manual greasing
and do not include an automatic greasing device.
REPLACING THE GREASE CARTRIDGE
Measure the distance from the top of the grease cartridge. Replace the grease
cartridge if the distance is more than 200 mm (7.87 in). The grease cartridge is
empty and has to be replaced when the distance is 210 mm (8.27 in).
1. Unscrew and remove the grease cartridge.
2. Dispose the used cartridge appropriately. Note: The grease cartridge is
disposable; it can not be refilled.
3. Check and clean the grease cartridge seat in the cartridge holder. Remove the
old grease cartridge seal.
4. Remove the protective cap from the new cartridge.
5. Check the grease cartridge seal.
R020105
200 mm
R020110