RAMMER 1533E Operator'S Manual Download | Manualshive

Page: 28 / 74

background image

COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY

Page 28 - Operation

Operation

1533E STD

5.2 DAILY OPERATION

GENERAL GUIDELINES

-

A safety screen is recommended to protect the operator from flying debris.
Keep the cabin windows and doors closed during operation.

-

Keep the tool at a 90 degree angle at all times. If the object moves or its surface
breaks, correct the angle immediately. Keep the feed force and tool aligned.

-

Keep the tool shank well greased during operation. Regular visual inspections
during operation are recommended. An unlubricated tool shank requires more
frequent greasing intervals. A tool shank covered with excessive grease
requires less frequent greasing intervals.

-

To use the hammer most efficiently when breaking large objects, concentrate
on small steps from the outer edge towards the middle.

«
...
26
27
28
29
30
...
»

Summary of Contents for 1533E











































































Reviews:

No comments

Related manuals for 1533E

Brand: Laser Pages: 8

Brand: ABIKOR BINZEL Pages: 56

Brand: Gage Bilt Pages: 12

Brand: Gage Bilt Pages: 13

Brand: Gage Bilt Pages: 9

Brand: Gage Bilt Pages: 10

Brand: Gage Bilt Pages: 8

Brand: Palmgren Pages: 4

Brand: Powerfix Profi Pages: 75

Brand: Jet Pages: 32

Brand: Equalizer Pages: 6

Brand: Eastwood Pages: 3

Brand: Beta Pages: 76

Brand: Rikon Power Tools Pages: 40

MCNC Swift 48 X 96-0233

Brand: Laguna Tools Pages: 27

Brand: Baileigh Industrial Pages: 44

Brand: SNOWJOE Pages: 20

Brand: Max Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands