RAM Commercial ProMaster 2024, Owner'S Manual, Page: 50 / 284

plate light, clearance lights and instrument panel lights
are also turned on. To turn off the headlights, rotate the
end of the multifunction lever back to the O (off)
position.
NOTE:
On vehicles sold in Canada, the rear parking lights,
clearance lights, and Daytime Running Lights (DRLs)
will turn on when the headlight switch is rotated to the
O (off) position.
DAYTIME RUNNING LIGHTS
(DRLS) — IF EQUIPPED
The Daytime Running Lights (DRLs) will come on when
the ignition is in the ON position and the vehicle is in
DRIVE or NEUTRAL.
To activate the DRLs, rotate the end of the multifunc-
tion lever to the O (off) position or the AUTO position.
NOTE:
•
For vehicles sold in Canada, the Daytime Running
Lights will automatically deactivate when the front
fog lights are turned on.
•
The low beams and side/taillights will not be on with
DRLs.
•
On some vehicles, the Daytime Running Lights may
deactivate, or reduce intensity, on one side of the
vehicle (when a turn signal is activated on that
side), or on both sides of the vehicle (when the haz-
ard warning lights are activated).
HIGH/LOW BEAM SWITCH
With the low beams activated, push the multifunction
lever forward to turn on the high beams. The High Beam
Indicator Light will illuminate in the instrument cluster
to indicate that the high beams are on. Pull the multi-
function lever back to the normal position to turn off.
When the ignition is placed in the OFF position, both
the high and low beams will turn off.
AUTOMATIC HIGH BEAM
HEADLAMP CONTROL —
IF EQUIPPED
The Automatic High Beam Headlamp Control system
provides increased forward lighting at night by automat-
ing high beam control through the use of a digital cam-
era mounted on the windshield.
This camera detects vehicle specific light and automati-
cally switches from high beams to low beams until the
approaching vehicle is out of view.
To operate, the multifunction lever must be in the AUTO
position and pushed forward. An indicator light will
appear in the instrument cluster display. To return to
AUTO headlights, pull the multifunction lever to the nor-
mal position.
NOTE:
•
The Automatic High Beam Headlamp Control can be
turned on or off by selecting “ON” under “Auto Dim
High Beams” within your Uconnect Settings
page 136.
•
Broken, muddy, or obstructed headlights and tail-
lights of vehicles in the field of view will cause head-
lights to remain on longer (closer to the vehicle).
Also, dirt, film, and other obstructions on the wind-
shield or camera lens will cause the system to func-
tion improperly.
•
When set to AUTO, the system automatically turns
the headlights on or off based on ambient light
levels.
FLASH-TO-PASS
You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will cause the high beam headlights to turn on, and
remain on, until the lever is released.
AUTOMATIC HEADLIGHTS —
IF EQUIPPED
To turn on the automatic headlights, rotate the end of
the multifunction lever to the AUTO position. To turn off
the automatic headlights, rotate the end of the multi-
function lever back to the O (off) position.
Use this QR code to access your digital
experience.
Scan me
48 GETTING TO KNOW YOUR VEHICLE