RAM Commercial ProMaster 2024, Owner'S Manual, Page: 124 / 284

NOTE:
•
When operating conditions have been met, the
LaneSense system will monitor if the driver’s hands
are on the steering wheel and provide an audible
and visual warning to the driver if removed. The sys-
tem will cancel if the driver does not return their
hands to the wheel.
•
LaneSense is a driving assist system, not an emer-
gency system, and does not replace the driver. The
driver is always responsible for controlling the
vehicle and must intervene as required. The Lane-
Sense system is designed to assist the driver and
not to substitute the driver.
TURNING LANESENSE ON OR OFF
The LaneSense button is located on the
switch panel below the Uconnect display.
To turn the LaneSense system on, push the LaneSense
button (LED turns off). A “LaneSense On” message is
shown in the instrument cluster display.
To turn the LaneSense system off, push the LaneSense
button twice (LED turns on).
NOTE:
The LaneSense system will retain the last system state
on or off from the last ignition cycle when the ignition is
placed in the ON/RUN position.
LANESENSE WARNING MESSAGE
The LaneSense system will indicate the current lane
drift condition through the instrument cluster display.
When the LaneSense system is on, the lane lines are
gray when both of the lane boundaries have not been
detected and the LaneSense telltale
is solid white.
Left Lane Departure — Only Left Lane Detected
•
When the LaneSense system is on, the LaneSense
Telltale
is solid white when only the left lane
marking has been detected and the system is ready
to provide visual warnings in the instrument cluster
display if an unintentional lane departure occurs on
the left side.
•
When the LaneSense system senses the lane has
been approached and is in a lane departure situa-
tion, the visual warning in the instrument cluster
display will show the left lane line flashing yellow
(on/off). The LaneSense telltale
changes from
solid white to flashing yellow.
NOTE:
The LaneSense system operates with similar behavior
for a right lane departure when only the right lane
marking has been detected.
Left Lane Departure — Both Lane Lines Detected
•
When the LaneSense system is on and both the
lane markings have been detected, the system is
armed to provide visual warnings in the instrument
cluster display and a torque warning in the steering
wheel if an unintentional lane departure occurs. The
lane lines turn from gray to white and the Lane-
Sense telltale
is solid green.
System ON (Gray Lines) With White Telltale
Lane Approached (Flashing Yellow Lane Line) With Yellow
Telltale
122 STARTING AND OPERATING