RAM Commercial ProMaster 2024, Owner'S Manual, Page: 27 / 284

3. Select the schedule to be set (1, 2, or 3) by pressing
the appropriate arrow on the right side of the
screen.
4. Select what time Scheduled Charging should start
and stop charging or select “Charge Until Full”. If
“Charge Until Full” is selected a stop charging time
cannot be selected.
5. Set the Charge Start Time: Hours, Minutes, and
AM/PM.
NOTE:
This is to occur every week (as long as the vehicle is
connected to an EVSE).
6. When done, press the X in the upper right hand cor-
ner, then select “yes” to save the charge schedule.
The active schedule will be indicated by the check
mark to the right of the schedule event line. The
event action and time will be displayed.
7. To add another Scheduled Charging event, repeat
these steps.
NOTE:
A maximum of three independent Scheduled Charg-
ing events can be scheduled at a given time.
NOTE:
•
If the charging schedule is not enabled, the vehicle
will charge whenever plugged in. It is not necessary
to set up the charging schedule to charge the
vehicle.
•
If the vehicle is plugged in outside of the charging
schedule set in the Uconnect system (and Charge
Until Full is not selected), the vehicle’s battery will
not charge. Charging will only begin immediately if
the vehicle is plugged in within the time and day of
the week set in the schedule. Otherwise, charging
will automatically begin when the selected charge
time/day of the week occurs or whenever the
vehicle is plugged in with no charge schedule set.
•
If the vehicle is turned off outside of the charging
window, a radio pop-up message will be displayed,
which provides an option to begin charging the
vehicle immediately. The pop-up message asks the
driver if they would like to “Charge Now?” and pro-
vides other information, including the next charging
schedule start time and estimated time to charge
the battery to 100%. If within one hour of selecting
“Yes,” the vehicle is connected to a powered EVSE,
the vehicle will immediately begin to charge (tempo-
rarily ignoring any set charge schedule). To fully
deactivate the charge schedule, refer to the “Sched-
ules” feature within the Electric Vehicle App.
•
The charging schedule can also be overridden if an
EVSE is plugged in, unplugged, and then plugged in
a second time to the vehicle. This “double plug
sequence” will override the schedule that is set in
the radio, and begin charging the vehicle immedi-
ately. The double plug sequence must be completed
within 10 seconds for it to override the programmed
schedule.
•
If “Charge Until Full” is selected, and the vehicle is
plugged in after the start time of the schedule, the
vehicle will start charging when it reaches the start
time the next day. If you would like to begin charging
immediately, and continue charging until the vehicle
is fully charged, you can select the “Charge Now”
option or use the double plug override option.
NOTE:
For information on jump starting your vehicle,
page 203.
AC Charging Level — If Equipped
The fourth screen within the Electric Pages App is the
AC Charging Level screen. From this screen, you can
select the rate at which your vehicle charges. Rate
selections 1 (low rate of charge) through 5 (high rate of
charge) are available. The lower the selected rate, the
longer it will take for your vehicle to reach a full charge.
Set Charge Schedule
GETTING TO KNOW YOUR VEHICLE 25
2