RAM Commercial ProMaster 2024, Owner'S Manual, Page: 26 / 284

NOTE:
For each segment of lights illuminated indicating the
percent of battery charge, two different blink rates are
used. A blink rate of 1 second on/1 second off indi-
cates that the first half is charging. The blink rate will
increase to 0.5 second on/0.5 second off to indicate
that the second half is charging. When the battery is
fully charged, the blinking stops and the lights remain
illuminated as charging continues.
ELECTRIC VEHICLE APP
Within the Uconnect system is the Electric Vehicle App
that allows you to see your vehicle’s power flow, under-
stand your driving history, and set a charging schedule
for your vehicle’s high voltage battery. To access this
App, press the Apps or Vehicle button on the main
menu bar of the radio’s touchscreen, and locate the
Electric Vehicle App. Accessing the app brings you to a
set of three pages: Power Flow, Driving History, Sched-
ules, and AC Charging Level.
Power Flow
The Power Flow screen shows the current power read-
ings for all of the following:
•
Motor - Shows the amount of power (in kW) the high
voltage battery is currently providing/absorbing.
•
Climate - Shows the amount of power (in kW) the
Climate Control system is using to maintain the cur-
rent interior temperature.
Power Flow paths are indicated by the direction of the
arrows on the touchscreen.
Driving History
The Driving History screen shows the miles (km) driven
in Full Electric kWh (battery powered) mode for both the
previous week and the current week. The data is dis-
played in a bar graph: Electric mode in teal.
Charging Schedule
To set a charging schedule, select the Electric Vehicle
App in the touchscreen and follow these steps:
1. Select “Schedules”.
2. Select “Charge Schedule”.
Electric Vehicle App Location
Power Flow Screen
Driving History Screen
Schedules Screen
24 GETTING TO KNOW YOUR VEHICLE