Figure 82:
Pattern Selection for the primary pickup/production line in dual product mode
The pattern for the primary pickup is selected first, where the name that is shown after the
‘on production line:’-text in figure 72 is the name that was given to the production line the
Pally program node → Pickup-tab → Primary-tab (see section
).
Press the ‘Next’-button to select a pattern for the secondary pickup, the window shown in the
figure below will then open. Note that the name of the production line is now set to the value
that was configured for the secondary pickup position in the Pally program node (see section
).
Version 2.9.1
© Rocketfarm AS 2021. All rights reserved.
91
