6.1.2 - License
A valid license must be obtained before the Pally URCap can be used. This can be done as
follows:
● In the Pally Installation node, navigate to the tab labelled ‘License’
● Insert a USB stick into the USB connector on the teach-pendant, click the ‘
Copy
request to USB’-
button.
● Send the license request to
● Download the license file to the root folder of a USB stick.
● Insert the USB stick in the USB connector on the teach pendant and click the ‘Load
license from USB’-
button.
The license request file, and the license file are named using the following naming
conventions, where
[serialNumber]
is the serial number of the robot:
●
License request file:
no.rocketfarm.urcap.palletmanager.[serialNumber].license_request
●
License file:
no.rocketfarm.urcap.palletmanager.[serialNumber].license
Figure 31:
The view confirming the installed license is valid.
Version 2.9.1
© Rocketfarm AS 2021. All rights reserved.
40
