RAIS Viva 100 L Classic Gas, Installation & Operation Manual

Page: 57 / 72

57
INSPECTING THE VENTING
An inspection of both the inner and outer vent pipes and the vent terminal should be
made as part of the annual service appointment. The venting must have no blockage
and be in good repair. The vent manufacturer’s instructions may provide specific details
on vent inspection. Any vent sections that are disassembled must be reassembled and
sealed as required.
This appliance should be inspected before use and at least annually by a qual-
ified service person. It is imperative that control compartments and circulating
air passageways of this appliance be kept clean.
CLEANING THE LOGS, BURNER AND FIREBOX
During the annual inspection and maintenance appointment, the service person should
clean the logs, burner and firebox. An extra-soft brush should be used to gently clean
the logs and burner. A vacuum cleaner may be used to clean the metal parts of the
firebox. Replace the logs and embers after cleaning.
MAINTENANCE LOG
Date of Service __________________
Serviced By ______________________
Service Performed
Inspect Venting
Clean Burner, Logs & Firebox
Clean Control Area
Clean Convection Air System
Leak Test Gas Connections
Other _______________________
Date of Service __________________
Serviced By ______________________
Service Performed
Inspect Venting
Clean Burner, Logs & Firebox
Clean Control Area
Clean Convection Air System
Leak Test Gas Connections
Other _______________________
Date of Service __________________
Serviced By ______________________
Service Performed
Inspect Venting
Clean Burner, Logs & Firebox
Clean Control Area
Clean Convection Air System
Leak Test Gas Connections
Other _______________________
Date of Service __________________
Serviced By ______________________
Service Performed
Inspect Venting
Clean Burner, Logs & Firebox
Clean Control Area
Clean Convection Air System
Leak Test Gas Connections
Other _______________________