RAIS Viva 100 L Classic Gas, Installation & Operation Manual

Page: 6 / 72

6
English RAIS - User manual for VIVA L Gas
IMPORTANT SAFETY INFORMATION
THE INSTALLATION MUST CONFORM WITH LOCAL CODES OR, IN THE ABSENCE OF
LOCAL CODES, WITH THE NATIONAL FUEL
GAS CODE, ANSI Z223.1 OR THE CANADIAN INSTALLATION CODE, CAN/CGA B149.
A MANUFACTURED HOME (USA ONLY) OR MOBILE HOME OEM INSTALLATION
MUST CONFORM WITH THE MANUFACTURED HOME CONSTRUCTION AND SAFETY
STANDARD, TITLE 24 CFR, PART 3280 OR WHEN SUCH A STANDARD IS NOT APPLI-
CABLE, THE STANDARD FOR MANUFACTURED HOME INSTALLATIONS, ANSI/BCSBCS
A225.1, OR STANDARD FOR GAS EQUIPPED RECREATIONAL VEHICLES AND MOBILE
HOUSING, CSA Z240.4.
THE APPLIANCE AND ITS APPLIANCE MAIN GAS VALVE MUST BE DISCONNECTED
FROM THE GAS SUPPLY PIPING SYSTEM
DURING ANY PRESSURE TESTING OF THAT SYSTEM AT TEST PRESSURES IN EXCESS
OF 1/2 PSI (3.5 KPA).
THE APPLIANCE MUST BE ISOLATED FROM THE GAS SUPPLY PIPING SYSTEM BY
CLOSING ITS EQUIPMENT SHUTOFF VALVE DURING ANY PRESSURE TESTING OF THE
GAS SUPPLY PIPING SYSTEM AT TEST PRESSURES EQUAL TO OR LESS THAN 1/2 PSI
(3.5 KPA).
THE INSTALLATION MUST PROVIDE FOR ADEQUATE VENTILATION AIR TO THE APPLI-
ANCE.
THIS GAS APPLIANCE MUST NOT BE CONNECTED TO A CHIMNEY FLUE SERVING A
SEPARATE SOLID-FUEL BURNING APPLIANCE.
THE APPLIANCE, WHEN INSTALLED, MUST BE ELECTRICALLY GROUNDED IN AC-
CORDANCE WITH LOCAL CODES, OR, IN THE ABSENCE OF LOCAL CODES, WITH
THE NATIONAL ELECTRICAL CODE ANSI/NFPA 70, OR THE CANADIAN ELECTRICAL
CODE, CSA C22. 1.
WHEN THE APPLIANCE IS INSTALLED DIRECTLY ON CARPETING OR NON-CERAMIC
TILE OR OTHER COMBUSTIBLE MATERIAL OTHER THAN WOOD FLOORING, THE AP-
PLIANCE SHALL BE INSTALLED ON A METAL OR WOOD PANEL EXTENDING THE FULL
WIDTH AND DEPTH OF THE APPLIANCE. A COMMERCIALLY AVAILABLE HEARTH
PAD MEETS THIS REQUIREMENT.
THE APPLIANCE AREA MUST BE KEPT CLEAR AND FREE FROM COMBUSTIBLE MATE-
RIALS, GASOLINE AND OTHER FLAMMABLE VAPORS AND LIQUIDS.
THE FLOW OF COMBUSTION AND VENTILATION AIR MUST NOT BE OBSTRUCTED.
DO NOT USE THIS APPLIANCE IF ANY PART HAS BEEN UNDER WATER. IMMEDIATE-
LY CALL A QUALIFIED SERVICE TECHNICIAN TO INSPECT THE APPLIANCE AND TO
REPLACE ANY PART OF THE CONTROL SYSTEM AND ANY GAS CONTROL WHICH
HAS BEEN UNDER WATER.
DUE TO HIGH TEMPERATURES, THE APPLIANCE SHOULD BE LOCATED OUT OF
TRAFFIC AND AWAY FROM FURNITURE AND DRAPERIES.