Continued on next page:
*NOTE: From this step on, construction methods are the same with or without the Wood Roof.
All steps from this point on will be shown as built with the Wood Roof.
1. Flush top face of lower 4 Hole Facia
(4721)
and 6 Hole Facia
(4732)
with previously installed 6 Hole
Facias
(4732)
(
12 5/8"
up as shown in Inset A) and attach to Corner Uprights
(6803)
using
3/8" Hardware
(H3) (H116)
. Offset holes on both Facias should be down (as shown in Detail A).
2. Measure up
70"
on Corner Uprights
(6803)
and attach Deck Facias
(4731)
using 3/8" Hardware
(H3) (H116)
.
3. Measure up
108"
on Corner Uprights
(6803)
and attach 6 Hole Facia
(4732)
,
8 Hole Facia
(4845)
,
and 8 Hole Facia
(4844)
to Corner Uprights
(6803)
using 3/8" Hardware
(H3) (H116)
. Offset holes on
the 6 Hole Facia
(4732)
must be down (as shown in Detail C). Offset holes on the 8 Hole Facias
(4845) (4844)
must be up.
4. Square each wall assembly using a tape measure, level, and square.
75
Step 25
Pod C Wall Support
Assembly