Continued on next page:
*NOTE: If assembling without the Wood Roof option, skip to Step 15.
1. Flush top face of lower 4 Hole Facia
(4721)
and 6 Hole Facia
(4732)
with previously installed 6 Hole
Facias
(4732)
(
12 5/8"
up as shown in Inset A) and attach to 48" DH Corner Uprights
(6802)
using
3/8" Hardware
(H3) (H116)
. Offset holes on both Facias should be down (as shown in Detail A).
2. Measure up
58"
on 48" DH Corner Uprights
(6802)
and attach Deck Facias
(4731)
using 3/8"
Hardware
(H3) (H116)
.
3. Measure up
96"
on 48" DH Corner Uprights
(6802)
and attach 6 Hole Facia
(4732)
,
8 Hole Facia
(4845)
, and 4 Hole Facia
(4693)
to 48" DH Corner Uprights
(6802)
using 3/8" Hardware
(H3) (H116)
.
Offset holes on 8 Hole Facia
(4845)
must be down (as shown in Detail C). Offset holes on the 6 Hole
Facia
(4732)
and the 4 Hole Facia
(4693)
must be up.
4. Position Short Center Posts
(6801)
directly on top of 48" DH Center Uprights
(6789)
and attach to
Main Beams
(7690)
, 4 Hole Facia
(4693)
, and 6 Hole Facia
(4732)
using 3/8" Hardware
(H3) (H116)
(H119)
.
5. Square each wall assembly using a tape measure, level, and square.
53
Step 14
Pod B Wall Support Assembly