Continued on next page:
*NOTE: If assembling Design A without the Wood Roof option, skip to Step 4.
*NOTE: When installing ML Center Uprights (6798), ensure they are spaced appropriately. All
ML Corner Uprights (6799) and ML Center Uprights (6798) should measure 32" from
outside to outside (as shown in Inset A).
1. Measure up
10 1/8"
and
84"
on ML Corner Uprights
(6799)
(as shown in Inset A) and attach 8 Hole
Facia
(4811)
and 6 Hole Facias
(4732)
to ML Corner Uprights
(6799)
and ML Center Uprights
(6798)
using 3/8" Hardware
(H3)
(H116)
. 6 Hole Facias
(4732)
should have offset holes nearest the edge up
(as shown in Details A & B).
*NOTE: 6 Hole Facia (4732), labeled A in the diagram, should be installed 10 1/8" up and with
offset holes nearest the edge up.
2. On the back side of the assembly, measure up
12 5/8"
on ML Corner Uprights
(6799)
(as shown in
Inset A) and attach 6 Hole Facia
(4732)
(labeled B) to ML Corner Uprights
(6799)
and ML Center
Upright
(6798)
using 3/8" Hardware
(H3)
(H116)
. 6 Hole Facia
(4732)
should have offset holes
nearest the edge up (as shown in Details A & B).
33
Step 3
Pod A Wall Support Assembly