Rain Bird LXME2, Installation, Programming & Operation Manual, Page: 9 / 91

Current Section: INTRODUCTION 9 Navigation:
1.8 Programming Checklist
When programming the LXME2 controller for the first time, it is recommended that you complete
the following steps in order.
1.8.1 Set Up Hardware
Install Base Module (BCM or
PSM)
Install Station module[s]
Fill out Programming Guide
Clear program information
Select language
Set the current date and time
Set up master valves/ pumps
(optional)
Set up weather sensors
(optional)
Set up stations
Set up a flow sensor
(optional)
1.8.2 Set Up Programs
Select program
Set watering start times
Select watering days
*
Set station run time(s)
* See Watering Days dial position for Odd, Odd31, Even and Cyclical watering cycles.
1.8.3 Set Up Advanced Programming (Optional)
Set seasonal adjust
Create a water window
Set up a station delay
Set up Simulstations