Rain Bird LXME2, Installation, Programming & Operation Manual, Page: 73 / 91

Current Section: Advanced Settings 73 Navigation:
Program Options
Next
Store Programs
Recall Programs
Delayed Recall
Clear Programs
Recall Delay
Next
02
Days Remaining
1
Turn the controller dial to Advanced Settings
2
At the IQ / ADVANCED screen, with “ Store/Recall Programs ” selected, press Next .
3
At the Program Options screen, press the key to select “ Delayed Recall ”, then press Next .
4
At the Recall Delay screen, press the and keys to set the number of days (from 0 to
90 days) before Contractor Defaults are restored. For example, set it to 7 days if you want
your original programs to be restored in one week.
•
To clear a Delayed Recall, set the number of days to 0.
Clear Program Information
The LXME2 controller allows you to clear an individual Program, all of your Programs or Restore the
controller to it’s factory default condition.
NOTICE
It’s recommended to back up your Programs before clearing them. The LXME2 controller’s built in Store
Programs feature can backup one set of programs. See “
Store/ Recall Programs ” for more details.
•
Irrigation start days, Start Times and station Run Times will no longer be present for the cleared Programs. If
no Programming exists then an Alarm will be shown. See “ Alarms ” for more details.