Current Section:
Advanced Settings 71
Navigation:
14.
ADVANCED SETTINGS
14.1.1 Store/ Recall Programs
The LXME2 controller comes standard with a simple to use backup programs feature.
Backup Programs allows you to save your programs as Contractor Default and then recall them at
a later time. It also includes a Delayed Recall feature that lets you save a normal irrigation schedule
as the Backup and then restore it later automatically. This may be useful for new seed or sod where
frequent irrigation can be programmed to occur until a set date when Delayed Recall automatically
returns the controller programming to the normal irrigation schedule.
NOTICE
The Backup Programs feature saves and restores ALL irrigation programming in ALL programs.
Store Programs
IQ / ADVANCED
Next
Store/Recall Programs
Factory Defaults
Configure Cartridge
About this LX-ME2
Program Options
Next
Store Programs
Recall Programs
Delayed Recall
Clear Programs
1
Turn the controller dial to Advanced Settings
2
At the IQ / ADVANCED screen, with “
Store/Recall Programs
” selected, press
Next
.
3
At the Program Options screen, with “
Store Programs
” selected, press
Next
.
4
At the confirmation screen, press and HOLD the
Yes
key for 4 seconds to Store All
Programs. If you’re not sure, press
No
.
5
A confirmation screen shows the process is running.
6
A confirmation screen shows the process is complete.