manualshive.com logo in svg

Rain Bird LXME2, Installation, Programming & Operation Manual, Page: 45 / 91

Share
Download
Rain Bird LXME2 Installation, Programming & Operation Manual Download Page 45

Current Section:

  Diagnostics  45

 

 

 

 

 

 

Navigation:

9.4.6  Program Run Times

Review total Run Time for an individual program.

CONFIRM PROGRAMS

Next

Program Summary 

Review Programs

Program Run Times

Station Run Times

Done

Total RunTime

HHHHHH:MM

000110:30

PGM 01

1 

Turn the controller dial to Diagnostics

2 

At the DIAGNOSTICS screen, press the   key to select “

Confirm Programming

”, then press

 

Next 

.

3 

At the CONFIRM PROGRAMS screen, press the   key to select “

Program Run Times

”, then 

press 

Next 

.

4 

The Total Run Time screen appears and total Run Time is shown for the currently 

selected program.

• 

If the desired program is not selected, press the Program Select button to choose the desired program. See 
“

Program Select Button

” for more details.

• 

For stations set up for Cycle+Soak, the Cycle Time (when irrigation is occurring) will be included in Program 

RunTime calculations but Soak times will NOT be included. See “

Cycle+Soak™

” for more details.

Use the Program Select button to change the program and repeat this process to review and confirm 

Program Run Times for other programs as desired.

Summary of Contents for LXME2




























































































Reviews:

No comments