manualshive.com logo in svg

Rain Bird LXME2, Installation, Programming & Operation Manual, Page: 49 / 91

Share
Download
Rain Bird LXME2 Installation, Programming & Operation Manual Download Page 49

Current Section:

  Alarms/ History  49

 

 

 

 

 

 

Navigation:

10.4.3  Flow Alarms

The LXME2 controller can be set up to issue alarms when flow conditions are in excess of your High 
Flow settings or below your Low Flow settings.

Occasionally a flow condition will be detected If the controller is set up to issue alarms for these 
conditions, the alarm light will illuminate and detailed descriptions of the Flow Alarm conditions will 
be created.

Station Flow Alarms 

Flow Alarms

Next

Station Flow Alarms

FloZone Flow Alarms

Clear Flow Alarms

1 

Turn the controller dial to Alarms/History

2 

At the ALARMS AND HISTORY screen, press the   key to select “

Flow Alarms

”, then press 

 

Next 

.

3 

At the Flow Alarms screen, with “

Station Flow Alarms

” selected, press 

 Next 

.

4 

The Station Flow Alarms screen appears, showing the first station where there is an 

alarm. Press the   and   keys to view the 

 Next 

 Station Flow Alarm.

5 

Note each station which has an alarm, then see “

Clear Flow Alarms

” below for more 

details on how to clear flow alarms.

Summary of Contents for LXME2




























































































Reviews:

No comments