manualshive.com logo in svg

Rain Bird LXME2, Installation, Programming & Operation Manual, Page: 59 / 91

Share
Download
Rain Bird LXME2 Installation, Programming & Operation Manual Download Page 59

Current Section:

  Flow Sensor   59

 

 

 

 

 

 

Navigation:

LEARN FLOW MENU

Next

All Stations

Select Stations

LEARN FLOW

Next

00

:  00

HH : MM

Start Learn Flow In

LEARN FLOW

Next

06  

:  00

HH : MM

Start Learn Flow In

4 

At the LEARN FLOW MENU screen, with “

All Stations

” selected, press

 Next 

.

5 

A confirmation screen appears; press

 Next 

 again.

6 

An information screen appears; press 

Next 

 again.

7 

To start the Learn Flow exercise immediately, press 

Next 

. Or else press the   and   keys 

to set a delayed start time. Press the   and   to navigate between the number setting 

fields.

• 

You can choose to run the exercise Now (00:00) or choose a timed delay of up to 24 hours.

8 

A confirmation screen appears, confirming the Learn Flow will overwrite the existing 

flow rates. Press Start to set the Learn Flow exercise.

9 

The Learn Flow Starting confirmation screen shows the time delay until the Learn Flow 

operation will start.

• 

An alarm will be posted if one or more stations learn a flow rate of 0 (zero). Check the valve if you receive this 

alarm.

 NOTICE

Be sure to Learn Flow again if you make any changes to your system which affect its hydraulics.

13.1.1  Selected Stations

• 

Ensure you have Run Times set up for all stations included in a Learn Flow exercise prior to setting up a Learn 

Flow.

Summary of Contents for LXME2




























































































Reviews:

No comments