manualshive.com logo in svg

Rain Bird LXME2, Installation, Programming & Operation Manual, Page: 48 / 91

Share
Download
Rain Bird LXME2 Installation, Programming & Operation Manual Download Page 48

Current Section:

  Alarms/ History  48

 

 

 

 

 

 

Navigation:

10. 

 ALARMS/ HISTORY

10.4.1  Flow History

With 

Flo-Watch™

 enabled, the controller will automatically track the volume of water flowing 

through the system.

• 

This can be useful for checking your actual water consumption against your water bill.

1 

Turn the controller dial to Alarms/History

2 

At the ALARMS AND HISTORY screen, with “

Flow History

” selected, press 

 Next 

.

3 

The Flow History screen appears, showing month-to-date and last month water 

consumption.

• 

Press the Days key to change the view to the last 30 days and previous 30 days.

ALARMS AND HISTORY

Next

Flow History

Flow Alarms

Flow History

Done

Clear

Months

Last 30 Days

 

0 Gal

Prior 30 Days

 

0 Gal

Flow History

Done

Clear

Months

Last 30 Days

 

0 Gal

Prior 30 Days

 

0 Gal

10.4.2  Clear Flow History 

1 

At the Clear Flow History confirmation screen, press the 

Yes

 key to continue. If you’re not 

sure, press the 

No

 key.

2 

The confirmation screen appears, showing that Flow History has been cleared, resetting 

the flow to 0.

• 

Pressing Clear from either the monthly or daily screen will clear BOTH monthly and daily flow log data.

Summary of Contents for LXME2




























































































Reviews:

No comments