Radwin 2000+ SERIES, User Manual

Page: 48 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 4 ‐ 24
External Connections
4.8 External Connections
4.8.1 Small Form ‐ Factor (RADWIN 2000 A+) ODU
The external connections for the connectorized RADWIN 2000 A+ are shown in Figure 4 ‐ 36 .
• Ground: Ground cable is attached to the ground lug.
• Antenna (x2): RF cables connect to the two antenna sockets (does not appear with
models with an integrated antenna)
• Power (IDU): The IDU port provides both a power and network connection from a PoE
device via a CAT ‐ 5e cable.
• Network (IDU): The IDU port provides both a power and network connection from a
PoE device via a CAT ‐ 5e cable.
Figure 4 ‐ 36: External Connections: RADWIN 2000 A+
4.8.2 Large Form ‐ Factor (RADWIN 2000 C+, RADWIN 2000
D+)
The external connections for the connectorized RADWIN 2000 C+ and RADWIN 2000 D+ are
shown in Figure 4 ‐ 37 .
• Power (IDU): The IDU port provides both a power and network connection from a PoE
device via a CAT ‐ 5e cable.
• Network (IDU): The IDU port provides both a power and network connection from a
PoE device via a CAT ‐ 5e cable.
• Sync: Connect the HSS serial unit to this port using an HSS cable (if you are using serial
hub site synchronization).
• Antenna: RF cables connect to the two antenna sockets (does not appear for models
with an integrated antenna)