Radwin 2000+ SERIES, User Manual

Page: 242 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 21 ‐ 2
What it Provides
For stand ‐ alone or unregistered radio units, you must connect a managing computer directly
to the radio unit and again log on as shown below.
21.5 What it Provides
The WI is a developing technology. It is possible that the current distributed release may have
additional or slightly different features from those shown here. The description below, should
nevertheless give you a good idea of how to use the WI.
21.6 Prerequisites
21.6.1 Hardware
You need a regular LAN connection between a managing computer and one of the link radio
units. The WI can be used directly opposite the RT ‐ A(HBS) any of its RT ‐ B(HSU)s. It can also be
used over the air from the RT ‐ A(HBS) to any registered RT ‐ B(HSU).
21.6.2 Software
Your computer should have at least version 6 of MS Internet Explorer. The Web interface also
works with other browsers such as Mozilla Firefox version 3 and later.
21.6.3 Technical Background
You should be familiar with the concepts underlying the RADWIN Manager and preferably
with the Manager itself.
21.7 Special Considerations Working with the
WI
21.7.1 Advanced Configurations
For setup configurations using features such as HSS, VLAN and QoS, you will need to use the
RADWIN Manager.
21.7.2 Operational Effects
Several WI functions cause temporary sync loss. Typically, changing the number of antennas
falls into this category. These cases will be pointed out in Warning messages.