Radwin 2000+ SERIES, User Manual

Page: 198 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 14 ‐ 2
Bulk Software Backup
The following detached window appears:
Figure 14 ‐ 1: Bulk Backup setup window
The default sites shown in the Bulk Backup list panel belong to the currently
installed link. The list may be empty if you are running the RADWIN Manager
“offline”.
2. The Bulk Backup list title bar has three buttons on the right hand side.
Figure 14 ‐ 2: Add / Remove site buttons
The left button opens up a Windows file dialog to locate a list of locations to
backup. The list has the following format for SNMPv1:
<IP address>,<Read ‐ Only community>,<Read ‐ Write community>
For SNMPv3 it is:
<IP address>,<Dummy>,<User_type><Password>
For example:
10.104.3.2,netman,admin,netwireless