Radwin 2000+ SERIES, User Manual

Page: 149 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 8 ‐ 8
Obtaining Reports
Figure 8 ‐ 3: Downlink ‐ Performance Monitoring report ‐ Valid data
The on ‐ screen report may be scrolled vertically and horizontally. The meaning of the column
headings is shown in the following table:
Table 8 ‐ 2: Performance Monitoring Fields
Column Heading
Abbreviation
Meaning
Description
Integrity Valid data flag
Green checkmark for current and valid; Red cross for
invalidated data (See example below). Note that the
Performance Monitoring data is not valid if not all the
values were stored (e.g., due to clock changes within
the interval or power up reset)
Date & Time Time stamp
Data are recorded every 15 minutes; the last 30 days
of recordings are maintained. Roll ‐ over is at midnight.
UAS
Unavailable
Seconds
Seconds in which the interface was out of service.
ES Errored seconds
The number of seconds in which there was at least
one error block.
SES
Severe Errored
Seconds
The number of seconds in which the service quality
was low as determined by the BBER threshold.
BBE
Background
Block Error
The number of errored blocks in an interval.
Rx MBytes
Received
Mbytes
The number of Megabytes received at the specified
port within the interval
Tx MBytes
Transmitted
Mbytes
The number of Megabytes transmitted at the
specified port within the interval.
Above Traffic
Thresh
Threshold set in
Figure 8 ‐ 2
Seconds count when actual traffic exceeded the
threshold
Active Seconds
The number of seconds that the configured Ethernet
service is active