Radwin 2000+ SERIES, User Manual

Page: 67 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 5 ‐ 3
First Log ‐ on
3. Check that you have connectivity to the radio unit. You can do this by opening up a
command line session ( Start|Run and then type, cmd ). At the command prompt,
type
ping 10.0.0.120
You should see a display similar to this:
Figure 5 ‐ 1: Pinging the base station.
Any other response from ping means that the radio unit is not responding. Check
your Ethernet connection and that the PoE is switched on (or voltage is connected
to the radio unit) and then try again. If you do not succeed, seek assistance from
RADWIN Customer Service.
4. Dismiss the command line session.
5.3.2 First Log ‐ on
1. Open the RADWIN Manager from the desktop icon, or click Start|Programs| RAD ‐
WIN Manager | RADWIN Manager .
The Log ‐ on dialog box appears: