RADWAG PUE HX5.EX, User Manual

Page: 46 / 52

46
•
Unload the weighing pan and press key to confirm.
•
Message
<Adjustment. Please wait…>
is displayed.
•
Upon completed start mass determination procedure, message
<Put
weight xxx>
is displayed (where: xxx – adjustment weight mass).
•
Load the weighing pan with required adjustment weight and press
key to confirm. Message
<Adjustment. Please wait…>
is displayed.
•
Upon adjustment completion, message
<Remove weight>
is displayed.
•
Take the weight off the weighing pan, the weighing device displays the
<Adjustment>
submenu.
15.2.2. Start Mass Determination
•
Enter
<Factory/Adjustment>
submenu.
•
Select
<Start mass determination>
parameter. Message
<Remove
weight>
is displayed.
•
Unload the weighing pan and press key to confirm.
•
Message
<Start mass determination. Please wait…>
is displayed.
•
Upon completed determination process, the weighing device displays the
<Adjustment>
submenu.
15.3. Linearity Correction
15.3.1. Linearity Determination
Declaring masses for subsequent linearity steps and determining corrections
by weighing instrument software.
Procedure:
•
Enter
<Factory/Section linearity>
submenu and select
<Determine>
parameter. Message
<Continue?>
is displayed.
•
Press key to confirm. Edit box
<Mass>
is displayed.
•
Unload the weighing pan.
•
Enter the required mass value (first linearity correction point) and press
key to confirm. Message
<Put weight xxx>
is displayed (where: xxx
– entered mass value).
•
Load the weighing pan remembering that the load mass must equal weight
value specified for the first linearity correction point (it is possible
to preview the weighing result in the displayed window).