RADWAG PUE HX5.EX, User Manual

Page: 42 / 52

42
14.5.3. Weighing Modules - Connections on Junction Box Board
No. Pcs. Name Parameters Notes
1 4 Load cell Ex version
2 1 Heat-shrink tubing with glue
Thickness after
shrinking > 0.3mm
3 1 6-wire shielded cable
6 x min 0.25mm
2
- max
1mm
2
in shield
4 1 Junction box board 476R1710
5 1 Junction box
Strip load cells' cables and 6-wire cable (3), remove about
4cm of external insulation.
15. FACTORY SETUP
To access and modify factory settings and parameters that are made available
for a user, run Factory Setup mode. Running Factory Setup mode enables
defining the scale.
15.1. Access to Factory Setup
•
Switch the weighing device off, to do it press key.
•
Put jumper to pins no. 2 and 3 of hermetic display module, see the photo.