59
CAUTION:
While determining sample quantity, and before accepting it, it is necessary
to wait until stable measurement pictogram
is displayed. Only if
visible on balance’s display, it is allowed to accept the declared quantity of
parts by pressing PRINT key. Otherwise balance will not accept the
measurement.
14.2. Checkweighing (HiLo) with reference to set standard
•
Enter the checkweighing mode
Summary of Contents for PS 1000/C/2
