29
10. BALANCE MAIN PARAMETERS
It is possible to adjust balance’s operation to ambient conditions at a workstation
(by setting filter range and value release parameters) or user requirements
(autozero settings, last digit visibility). These parameters are set in group
<
P3 rEAd
>.
10.1. Setting level of filtering
Procedure
:
-
using
UNITS
key to select desired value of filter settings
StAnd
– (normal) – normal operation conditions
Slouu
– (slow) – harsh operation conditions - vibrations, etc.
Fast
– (fast) – good operation conditions – no vibrations, etc.
Return to weighing
(see point – 8.2. – return to weighing).
CAUTION
:
Summary of Contents for PS 1000/C/2
