- 167 -
9.
Standard liquid [name of liquid used for determining density
measurement of solid object
]
10.
Standard liquid density [
density determination of solid object
]
11.
Temperature [temperature of liquid used for carrying out a
measurement,
density determination of solid
object
]
12.
Plunger volume [
density determination of liquid
]
13.
Mass of steel standard [
density determination of air
]
14.
Mass of aluminium standard [
density determination of air
]
15.
Density of steel standard [
density determination of air
]
16.
Density of aluminium standard [
density determination of air
]
17.
Weighing 1
[mass measurement of tested sample or a
plunger in the air, or mass of measured steel
standard]
18.
Weighing 2
[mass measurement of tested sample or a
plunger in liquid, or mass of measured aluminium
standard]
29.8.
Controls
(not available in standard balance version)
Each product control carried out on a balance is sent to a connected printer and
saved in the
< Controls>
database. Each control saved in the database
features its specific number set at the moment of its completion.
Control number format:
X / y y / M M / d d / H H / m m
, where:
X - control type which takes the following values:
U – control regulated by the act,
Z – control completed by a user,
W - control regulated by an internal criteria
yy – year of control end,
MM – month of control end,
dd – day of control end,
HH – hour of control end,
mm – minute of control end.
Balance user can preview data on each control.
Procedure
•
Enter submenu
< Databases>
in accordance with point 27 of this user
manual,
•
Enter
< Controls>
database and select a desired control record.
List of parameters defined for a control:
1.
Batch number
[batch no. of a controlled product]
