- 72 -
•
Press <
Target Value > key and insert number of parts recognized as
the target value,
•
If tolerance applies, set its value (range between 0 – 100%)
•
Under the measurement result there is bargraph displayed, containing:
o
Current number of parts on the weighing pan (marked with colours –
see point 16.7.)
o
The value of Target Mass (black marker)
Caution:
The checkweighing and dosing functions can operate simultaneously in the parts
counting mode. In such case the dosing tolerance is controlled by Lo and Hi
thresholds of the checkweighing function.
