RadiSys EPC-5A, Hardware & Software Reference Manual

Page: 17 / 156

Chapter 2: Before Installation
Page 9
2 2
The EPC-5A plus EXM expansion modules plus any mass storage module can be
considered together as a single subsystem. Use the following worksheet to determine
the total number of VME expansion interface slots your particular subsystem
configuration requires.
Product VME Slots Total
EPC-5A
(Includes first two EXM modules)
2
Additional EXP-MC(s)
(Holds additional two EXM modules) 1
each
EXP-AM 2
Mass Storage Module (EXP-MX
including EXP-MX200A and greater)
2
or
EXP-MX200
3
Total VMEbus slots used ...........................
Table 2-1. VME Slots Available.
Once you have determined where the EPC-5A subsystem will be physically located in
the chassis, the VME backplane must be jumpered appropriately.