All inputs range from -100% to + 100%. Gimbals, knobs, sliders, channels, global variables, and
coach input.
If you want the servo of the No. 2 plug connected to the receiver to be controlled by lifting (ELE),
you only need to create a mixing entry on CH2 and use the Ele input as the source of operation.
Each channel can have many lines, and you can choose the operation between each line. Long
press the ENT key and select Insert Before / After to create a new line.
By default, all lines on the same channel are added together, and the next line can choose to be
superimposed or multiplied with the channel value of the previous line, and replaced completely.
Please note that the currently active row of settings will be displayed in a bold font, making it
easy to recognize the item currently in use at a glance. The CH1 channel shown in the figure is
input by the Ail gimbal, and the three states of the SA switch are used to switch three travel
amounts.
To edit a mixing control, use the scroll wheel to select the mixing control item up and down, and
press and hold the ENT key to enter the editing submenu. Select Edit and press the ENT key
momentarily.
Detailed settings for mixing entries