SF1
：
When the SE switch position is - , Play the sound file “disarm.wav”.
SF1
：
When the SE switch position is
↓
, Play the sound file “armed.wav”.
SF4
：
When the logic switch L01 is automatically turned on, lowbat (low battery voltage)
warning sound will be broadcasted. The right-most 2 means that the voice will be
broadcasted every 2 seconds. Automatically turn on when
Each model can have 64 special functions. In addition, there are 64 global settings that are
common to all models. To use the global function, please enter the Global Functions page in the
radio-control system settings to set it.
Each setting is activated with a trigger switch. You can select physical switches, logical
switches, fine-tuning buttons, and flight mode. There are two other special options, ON and
Ones (which are always enabled when the machine is turned on), and One (which is performed
only once when the machine is turned on)
Press and hold the ENT key to enter the sub-menu for displaying sources by category.
Scroll up or down to select the desired category and press the ENT key.
The following functions are triggered by the switch selected above
Overr.CHn
Override channel value, “n” in word CHn is channel number.
Trainer
Coach mode enable switch, it is recommended to set to SH rebound switch,
this switch is used to activate or stop the operation of the student machine
Inst.Trim
One-touch saves the current gimbal position as a fine-tuning value
Reset
Reset, you can choose to reset all or reset one way individually. The
content of the reset option is the same as that in the main interface.
Set Tmr
Used to set the timer, set the timer time and turn on when the switch is
turned on
Adjust
Adjust the global variable Gvar and enter a fixed number directly
Press and hold the Ent pop-up menu to change the way to set Gvar. There
are three options:
Mixer Source: Set the value of Gvar with an input source
