Radio Thermostat CT200, User Manual

Page: 32 / 50

Customization
6
Vivint Element CT200 Operation Guide
Info
Information about the Thermostat device includes:
Power
: The power supply the unit is currently using (batteries,
C-wire, and/or transformer)
Battery:
How much battery power is currently left, if batteries
are installed in the unit
Heating:
The heating setting the system is currently using
Active Relays:
The wires currently being used by the system
Network:
Whether or not the unit is currently connected to a
Z-Wave network
Software:
The current software and firmware versions the unit is
using
1 From the Home screen, press and hold the SIDE button for three
(3) seconds
2 Press DOWN to highlight Info, then press the SIDE button
Information about the Thermostat displays
3 Press UP or DOWN to scroll through the available information
Installer
Installer settings control the following Thermostat functions:
EQUIPMENT: heating, cooling, humidity control, and fan behavior
COMFORT: swing, differential, and other settings
NETWORK: the Thermostat’s connection to a Z-Wave Network
TESTING: the Thermostat’s connection to your equipment
RESET: resetting the Thermostat’s software to factory default
!
WARNING
Be sure to turn the thermostat operating mode to OFF before
changing HVAC setup
32