Radio Thermostat CT200, User Manual

Page: 34 / 50

Customization
6
Vivint Element CT200 Operation Guide
Staging
1 From the Home screen, press and hold the SIDE button for three
(3) seconds
2 Press DOWN to highlight Installer, then press the SIDE button
3 Press DOWN to highlight Comfort, then press the SIDE button
4 Press DOWN to highlight Staging, then press the SIDE button The
current staging value displays
5 Press UP or DOWN to change the value, then press the SIDE
button to confirm.
Network
Network settings enable you to add and remove the Thermostat to a
Z-Wave Network, and to reset the network connection
Before starting this procedure, go to your Vivint panel and prepare it
for new devices Once it is ready, add the Thermostat to the network
1 From the Home screen, press and hold the SIDE button for three
(3) seconds
2 Press DOWN to highlight Installer, then press the SIDE button
3 Press DOWN to highlight Network, then press the SIDE button
4 Press DOWN to highlight "Connect", then press the SIDE button
The current networking status displays
Installer: Comfort Cont.
34