Radio Thermostat CT200, User Manual

Page: 31 / 50

Customization
Vivint Element CT200 Operation Guide
The Settings screen provides access to many features and settings of
the Thermostat Features you can control on the Settings screen are
ºF / ºC display, humidity targets, display behavior, information about
the Thermostat, and installer settings The following pages provide
detailed information about each of these settings
Units
The Thermostat can display either Fahrenheit or Celsius temperature
units The Thermostat can display room temperatures in a range
from 28°F to 99°F (-2°C to 37°C) with increments of 0 5° (F or C)
1 From the Home screen, press and hold the SIDE button for three
(3) seconds
2 Press DOWN to highlight User, then press the SIDE button
3 Using the UP or DOWN buttons, select an option, then press the
SIDE button to confirm.
Humidity
This screen is only available if your system includes humidity
controlling equipment
1 From the Home screen, press and hold the SIDE button for three
(3) seconds
2 Press DOWN to highlight Humidity, then press the SIDE button
The current Humidity Target Level percentage displays
3 Press UP or DOWN to set a new target humidity percentage, then
press the SIDE button to confirm.
Display
The Thermostat display can operate in one of two modes: Approach
or Button Tap Approach means that the device’s display will
automatically turn on when it senses you approach within 4 (four)
feet of the unit Button Tap means that you will have to press one of
the buttons on the unit to wake the display
1 From the Home screen, press and hold the SIDE button for three
(3) seconds
2 Press DOWN to highlight Display, then press the SIDE button The
current Display On behavior has a check mark next to it
3 Press UP or DOWN to select a behavior, then press the SIDE
button to confirm.
31