Radio Thermostat CT200, User Manual

Page: 29 / 50

Vivint Element CT200 Operation Guide
Product Overview
Z-Wave and Thermostat Programs
The Thermostat must be included on a Z-Wave network in order
to operate Use your Z-Wave application to adjust the heating and
cooling programs that the Thermostat uses to run your system
You can temporarily override target temperatures and change
system modes from the thermostat, but you must use the Z-Wave
application to make permanent changes to programs
Compressor Protection
The Thermostat has a minimum cycle time of four (4) minutes to
protect your compressor from excessive wear from responding to
thermostat changes The Home screen shows an hour glass and the
message “Please Wait”. The compressor will not come on until the
four-minute delay is over
29