Radio Shack 43-140 Owner'S Manual Download Page 20

Page: 20 / 68

The.Basics

Turning.Talking.Caller.ID.On/Off

Your new phone comes with a feature

called Talking Caller ID. If you subscribe

to Caller ID services from your telephone

provider and when this feature is turned

on, your base unit will announce the

name of the incoming caller when you

receive a call. You can turn this feature

on or off by moving the

TALKINg

CALLER ID ON/OFF

switch to the on or

off position as desired.

NOTE

Your phone will only be able to announce the

incoming caller names when that information is

available for that call. If a private caller rings you, the

announcement will say Private Caller.

Installing.the.Charger

You can power the charger using the supplied 9V, 210mA AC

adapter.
1. Insert the supplied AC

adapter’s barrel plug into

the

DC IN 9V

jack on the

bottom of the charger.

2. Route the cord through

the strain relief slot and

plug the adapter into a

standard AC outlet.

3. Before using your handset, you must charge the battery pack

for about 15-20 hours.

Place the cordless handset on the charger face forward

to charge the battery pack. The

CHARgE

indicator on the

charger lights.

UC044ZH_43-140_OM5.indd 20

12/18/2006 3:33:55 PM

Summary of Contents for 43-140





































































Search results

Summary of Contents for 43-140

Reviews:

Related manuals for 43-140

Brands by name

Popular brands

Radio Shack 43-140, Owner'S Manual

Search results

Summary of Contents for 43-140

Reviews:

Related manuals for 43-140

Brands by name

Popular brands