Radio Shack 43-140 Owner'S Manual Download Page 16

Page: 16 / 68

The.Basics

NOTE

The uSOC number of the jack to be installed is RJ11C

(or RJ11W for a wall plate jack).

Installation

Before using your phone, carefully peel the protective film off the

display. The film protects the base and cordless handset window

during shipment and is not necessary for use.

Selecting.a.Location

You can place the phone’s base on a desk or table, or mount it on

a standard wall plate or directly on a wall. Select a location that is:

near an accessible AC outlet

near a telephone line jack

out of the way of normal activities

away from electrical machinery, electrical appliances,

metal walls or filing cabinets, wireless intercoms, alarms,

and room monitors

away from other cordless phones

NOTES

If your home has specially wired alarm equipment

connected to the telephone line, be sure that

installing the system does not disable your alarm

equipment.

If you have questions about what will disable

alarm equipment, contact your telephone company

or a qualified installer.

•

The base’s location affects the handset’s range. If you have a

choice of several locations, try each to see which provides the

best performance.
Your telephone connects directly to a modular telephone line jack.

If your telephone wiring does not have a modular jack, you can

update the wiring yourself using jacks and adapters (available at

your local

RadioShack

store), or have the telephone company

update the wiring for you. You must use compatible modular

jacks that are compliant with Part 68 of FCC Rules.

•

UC044ZH_43-140_OM5.indd 16

12/18/2006 3:33:51 PM

Summary of Contents for 43-140





































































Search results

Summary of Contents for 43-140

Reviews:

Related manuals for 43-140

Brands by name

Popular brands

Radio Shack 43-140, Owner'S Manual

Search results

Summary of Contents for 43-140

Reviews:

Related manuals for 43-140

Brands by name

Popular brands