Radio Shack 43-140 Owner'S Manual Download Page 17

Page: 17 / 68

The.Basics

On.a.Desk.Top

1. Connect the corded handset

cord to left side of the base

and to the corded handset.

Route the curl cord inside the

molded wiring channel as

shown.

2. Plug one end of the supplied long modular cord into the

PHONE

jack on the back of the base.

3. Insert the supplied AC adapter’s barrel plug into the

DC IN 9V

jack on the back of the base.

4. Route the adapter cord and

modular cord through the

slot as shown.

5. Plug the other end of the

modular cord into a modular

phone line jack.

6. Plug the adapter into a

standard AC outlet.

CAuTION: You must use a Class 2 power source that

supplies 9V DC and delivers at least 500 mA (for the

base)/210 mA (for the charger). Its center tip must

be set to positive and its plug must fit the phone’s

DC IN 9V jack. The supplied adapter meets these

specifications. Using an adapter that does not meet

these specifications could damage the phone or the

adapter.

UC044ZH_43-140_OM5.indd 17

12/18/2006 3:33:52 PM

Summary of Contents for 43-140





































































Search results

Summary of Contents for 43-140

Reviews:

Related manuals for 43-140

Brands by name

Popular brands

Radio Shack 43-140, Owner'S Manual

Search results

Summary of Contents for 43-140

Reviews:

Related manuals for 43-140

Brands by name

Popular brands