Beyond.the.Basics
2. Press
SELECT/
to move the pointer to select RING TIME,
and then press
MENu/SET
.
3. Press
SELECT/
or
SELECT/
to select a Ring Time (TOLL
SAVER, 2 TIMES, 4 TIMES, or 6 TIMES).
4. Press
MENu/SET
. You will hear a confirmation tone.
Activating.the.Message.Alert
The Message Alert feature sounds a short alert tone every 15
seconds whenever you have a new message. Once all new
messages have been played, the alert tone automatically stops
beeping until you receive another new unplayed message.
1. Press
MENu/SET
on the base.
2. Press
SELECT/
to move the pointer to select MESSAGE
ALERT, and then press
MENu/SET
.
3. Press
SELECT/
or
SELECT/
to select ON or OFF.
4. Press
MENu/SET
. You will hear a confirmation tone.
To quickly turn off the Message Alert tone, press any key on
the base unit; the tone will automatically quiet until you receive
another new message.
Setting.Your.Greeting
When you receive a call, the answering machine automatically
plays either the pre-recorded message or your own greeting.
Your answering machine comes with the following pre-recorded
message:
“Hello, no one is available to take your call. Please leave a
message after the tone.”
Or you can record your own personal outgoing greeting. Your
recorded greeting must be between two seconds and 30 seconds
long. Once you have recorded a personal greeting, you can
switch back and forth between the pre-recorded greeting and
your own personal greeting.
UC044ZH_43-140_OM5.indd 52
12/18/2006 3:34:04 PM
