Radio Shack 43-140 Owner'S Manual Download Page 60

Page: 60 / 68

Beyond.the.Basics

Troubleshooting

If your phone is not performing to your expectations, please try

these simple steps first.

Symptom

Suggestion

The

CHARgE

light won’t

illuminate when

the cordless

handset is placed

in the charger.

Make sure the AC adapter is plugged into

the charger and wall outlet.

Make sure the cordless handset is properly

seated in the charger.

Make sure the charging contacts on the

cordless handset and charger are clean.

•

The audio sounds

weak and/or

scratchy.

Move the handset and/or base away from

metal objects or appliances and try again.

Press

DEL/CH

during a call to help

eliminate background noise.

Make sure that the cordless handset is not

too far from the base.

•

Can’t make or

receive calls.

Check both ends of the telephone line

cord.

Make sure the AC adapter is plugged into

the base and wall outlet.

Disconnect the AC adapter for a few

minutes. Then reconnect it.

Make sure that the cordless handset is not

too far from the base.

Check the dialing mode used by your

telephone company.

•

During power

failure, can’t make

or receive a call.

Make sure to use corded handset to make

or receive a call.

Make sure that telephone line cord is firmly

connected.

•

UC044ZH_43-140_OM5.indd 60

12/18/2006 3:34:06 PM

Summary of Contents for 43-140





































































Search results

Summary of Contents for 43-140

Reviews:

Related manuals for 43-140

Brands by name

Popular brands

Radio Shack 43-140, Owner'S Manual

Search results

Summary of Contents for 43-140

Reviews:

Related manuals for 43-140

Brands by name

Popular brands