Radio Shack 43-140 Owner'S Manual Download Page 51

Page: 51 / 68

Beyond.the.Basics

Setting.the.Record.Time.(or.Announce.Only)

You can select how long a caller has to record a message.

You have three record time options. The options 1 MINUTE

or 4 MINUTES set the duration for recording the incoming

messages. ANNoUNCE oNLY answers the call and plays either

your personal greeting or the pre-recorded system greeting, but

prevents the caller from leaving a message.
1. Press

MENu/SET

on the base.

2. Press

SELECT/-

to move the pointer to select RECoRD TIME,

and then press

MENu/SET

3. Press

SELECT/

to select Record Time 1

MINUTE, 4 MINUTES, or ANNoUNCE oNLY.

4. Press

MENu/SET

. You will hear a confirmation tone.

Activating.Call.Screening

Your phone allows you to listen to callers leaving you a message.

This feature can be turned on or off with the following steps:
1. Press

MENu/SET

on the base.

2. Press

SELECT/

to move the pointer to select CALL

SCREENING, and then press

MENu/SET

3. Press

SELECT/

to select ON or OFF.

4. Press

MENu/SET

. You will hear a confirmation tone.

Setting.the.Number.of.Rings

The ring time setting allows you to set the number of rings the

caller hears before your answering machine plays the outgoing

message. You can set the ring time to answer after two, four, or

six rings. If you enable the Toll Saver, the answering machine

picks up after two rings if you have new messages and after four

rings if there are none.
1. Press

MENu/SET

on the base.

UC044ZH_43-140_OM5.indd 51

12/18/2006 3:34:03 PM

Summary of Contents for 43-140





































































Search results

Summary of Contents for 43-140

Reviews:

Related manuals for 43-140

Brands by name

Popular brands

Radio Shack 43-140, Owner'S Manual

Search results

Summary of Contents for 43-140

Reviews:

Related manuals for 43-140

Brands by name

Popular brands