11.
RT-311 bridge
The DELTA CEP A has a digital interface to drive the Swarm Oscillator RT-311 directly. The
connection is made on the back of the modules.
There you will find a ten pin header in the upper area of the main board of the DELTA CEP
A. The socket connector has a label "SWARM EXPANSION". To connect the two modules
you need a ten pin ribbon cable. The Swarm Oscillator should be installed in the same
cabinet as close to the DELTA CEP A as possible. If you want to make this connection, you
should definitely disconnect the power supply and unplug the power cord or power supply
beforehand! Further information can be found in the V2.0 Update description of the Swarm
oscillator RT-311. Version 2.0 of the RT-311 firmware is necessary for the two devices to
communicate.
- - -
DENSITY
Select the LED beside the {SNAP]-button with the DENSITY
knob.
- - -
SNAP
Toggle the Power-Down function On and O
ff
with the {SNAP]-
button.
von
55
63
Summary of Contents for DELTA CEP A
Page 1: ...Owner s Manual DELTA CEP A...
