RADICAL DELTA CEP A, Owner'S Manual

Page: 53 / 63

7.4 Clock-Output jack and Clock-Divider
As mentioned above, the clock output is used to synchronize external modules. When
using a MIDI clock as the timebase, you can set a clock divider for the output. These
settings are in the utility menu as well:
8. Tuning the Delta CEP A
In order to get the octave switching of the oscillator working correctly even at different
tunings, we need a way to set the basic tuning of the module. This can be done in the
tuning menu:
Divider for external clock signals.
Button Knob/Button Description
- - - SHIFT
Hold down the [SHIFT] button to enter the utility menu. You
must hold the button until all LEDs 1-8 are lit blue. If you
release the [SHIFT] button afterwards, the utility menu will
become active.
- - - BIG KNOB
Select the fifth submenu with the big knob. LED 5 lights blue
in this selection.
- - -
DENSITY
In this menu you can select 6 di ff erent division factors with the
Density knob. After selection, confirm the selection with the
[SNAP] button. The division factors result in the following note
values: 1/4, 1/8, 1/12, 1/16, 1/24, 1/32.
These are arranged as follows on the LEDs to the right of the
buttons:
[SHIFT/MANUAL] = 1/4
[TEMPO] = 1/8
[SNAP] = 1/12
[MUTE] = 1/16
[MORPH] = 1/24
[PATCH] = 1/32
- - - SNAP
Confirm the desired value by pushing the [SNAP] button.
- - - SHIFT Press the [SHIFT] key to exit the utility menu.
Mastertuning of the DELTA CEP A
Button Knob/Button Description
- - - SHIFT
Hold down the [SHIFT] button to enter the utility menu. You
must hold the button until all LEDs 1-8 are lit blue. If you
release the [SHIFT] button afterwards, the utility menu will
become active.
- - - BIG KNOB
Select the seventh submenu with the big knob. LED 7 lights
up purple in this selection.
- - -
DENSITY
With the [DENSITY] knob, you can set the basic tuning of the
module in the range of +/- 7 cents - ie the pitch A from 433 to
447 Hz. In the middle position A = 440 Hz, a white LED lights
above and below the Big Knob. Values above this basic mood
are indicated by red LED lights and values below by blue LED
lights.
- - - SHIFT
Press the [SHIFT] button to exit the utility menu.
von 53 63