RADICAL DELTA CEP A, Owner'S Manual

Page: 40 / 63

4.5.2 Snapshot morphing
The snapshot morphing actually works just like the snapshot sequencer mode in the
chapter before. The only difference is that the values do not jump, but are blended and
morphed. We start again without the clock to control the morphing with the 'Big Knob'.
Now select the snapshot morphing mode:
Applications: Producing spectacular sound changes with just one knob.
Applications: Drones, ecstatic pads and strange sound developments.
The snapshot morphing mode allows for triggering the ADSR envelope at snapshot change
over:
Switching off the tempo clock.
Button Knob/Button Description
SHIFT
TEMPO
Hold down the [SHIFT] button and tap the [TEMPO] button. If
the tempo LED flashes yellow, the MORH-LFO is stopped, it is
green, it is running. So you can always switch between
running and stopped.
Selection of the second operating mode - morphing snapshots.
Button Knob/Button Description
MORPH BIG KNOB While holding down the [MORPH] button, select No. 2 on the
LED scale.
BIG KNOB If you release the [MORPH] button, you can crossfade the
snapshots with the big knob or morph from one snapshot to
the other.
Switching on the tempo clock.
Button Knob/Button Description
TEMPO
- - - Tap the tempo on the [TEMPO] button. To the right of the
tempo button you will see an LED that flashes according to
the detected tempo.
SHIFT
TEMPO Hold down the [SHIFT] button and tap the [TEMPO] button. If
the tempo LED flashes yellow, the MORH-LFO is stopped, it is
green, it is running. So you can always switch between
running and stopped.
TEMPO
BIG KNOB Hold down the [TEMPO] key and use the Big Knob to select a
value between 1 and 8 in the LED string. Now the morphing
function is running and you are listening to a sequence of your
snapshots! The higher the value, the faster the sequence.
von 40 63