The Swarm oscillator provides up to 8 oscillators. Paraphonic play modes (allowing 4
voices to be played simultaneously), pitch quantization, and easy tuning access are the
highlights of the Swarm oscillator.
Mixer
This section mixes the outputs from the oscillator and the noise source or an external signal
for the filter. The signal of the oscillator can be overdriven.
VCF
The filter section of the DELTA CEP A offers three different filters - a digital 12 dB
multimode filter, an analog 12dB multimode filterm, and a digital 24 db lowpass filter.
ADSR
The ADSR envelope section provides crisp sound curves. As a highlight, this section offers
a voltage control for the attack and decay time.
VCA
The VCA can be controlled by either the ADSR envelope or the gate signal. The VCA
section also provides external inputs for the following FX processor.
FX
The right side of the front panel contains the effect section with delay, chorus, flanging and
phasing effects.
Some words about labelling
If you check the labelling on the DELTA CEP A front panel you will notice different color
schemes: white characters on blue background, white characters on black, etc.
Labelling on the DELTA CEP A frontpanel.
Output jacks are marked with black characters on a blue background.
Input jacks are marked with white characters on a black background.
One input jack in the LFO section has a special function when the morph mode
is active. We marked that with black charachters on a white background.
The framed white characters are only used for one button and two knobs. The
button [PARAPHONIC] has the framed labelling ‘QUANTIZER’. By holding the
[QUANTIZER] button down, you get access to the two alternative features for
the knobs SCALE ROOT and SCALE SEL. Please check Chapter 3.2.1 for
more details.
[MANUAL] has an open frame marking. Open frame labellings are indicating
that you get access to further functionality by holding the button down until all
LEDs 1-8 light up.
White characters on blue background are marking shift-functions. The DELTA
CEP A has alternative functions for buttons and knobs. Hold the [SHIFT] button
to access them.
White characters on a black background are marking the basic function of a
button or a knob.
TLM
SHIFT
MANUAL
1
SCALE ROOT
1V/OCT
PITCH
von
12
63
Summary of Contents for DELTA CEP A
Page 1: ...Owner s Manual DELTA CEP A...
